Refer to the radiator fan diagram for the Audi 100 (manufactured in 82-91) See the radiator fan diagram for the Audi 100 (manufactured in 82-91).
Many Audi 100 car owners are faced with the problem of the fan, which is located on the radiator. As a rule, the problem is in the wiring or the propeller itself, but in any case, you should first check all the connections (wires) and contacts, and for this you need a diagram of the operation of this cooling device. In the event of a breakdown of this simple equipment, it is prohibited to continue driving, because due to engine overheating, the consequences can be much more destructive than a fan on a radiator. To read the diagram, use the information - legend.
Attention! Before working with electronic equipment, stop the car engine and remove the wire from the "-" terminal from the battery.
Radiator fan connection diagram
J101 - relay for controlling the second fan speed; | F54 - Audi 100 fan thermal switch; |
J138 - a unit that controls the fan after stopping the engine of the machine; | F87 - fan thermal switch after stopping the engine; |
S5 - fuse in the block; | V7 - Audi 100 electronic fan motor; |
S15 - fuse in the block; | 82 - connection to "mass" 1 in the front wiring harness on the left; |
T10d - 10-pin connector (yellow) located behind the dashboard; | 83 - earth connection 1 in the front wiring harness on the right. |
Audi